Body Mods Oreo Update

I have updated 3 of my older mods with the latest version of Oreo Body in the half-off state. This also improves support for smaller breasts.

These are standalone mods, so you don’t need the Oreo mod for it to work. Just wear the “body clothes” and switch to the half off state to access Oreo’s version.

If you know how to use StudioNEO, Nodes, RendererEditor, and HSPE, you should be able to use these to their fullest potential, within the studio’s limits ofc.

Links:
Combo Body
Dyna Vagina
FK Foot

Spooktober

General updates:

Olga Discordia has gone into the texturing phase, but I suck at it. I may proceed on with a beta version which is some of the textures, but all of the model which includes the half off state and last minute polishing.

I need to start working on the Malig Master port too. So it should be this month? Hopefully.

If you’ve missed it, IK Items has been updated.

This adds 3 blendshapes for shaft manipulation.
These can be used with Timeline mod to add a bit of flex to dicks.

BTW. Even though IK versions of the penises are built with IK in mind, you can use it like the regular versions, except for maybe soft ver.

Get it here.

General Blog Update Aug 23

Women’s clothing page has been fixed, as per previous post.
Yakuza Revamp has been updated to fix some errors that went by unnoticed.
Combo Body is now at version 1, which includes Oreo Body.

That’s all for now.

Re-added missing row of mods to women’s clothing.

I was notified of some missing mods in the woman’s clothing page. I seem to have overlooked an entire row of mods during the transfer from the old template.

They have been re-added so you don’t have to go searching for them deep inside the archives or search bar.

These three are:
Starlight Queen
Iblis Witch
Skull Crusher

Until next time~!

[AM] JF Hairs alt color

This is a standalone alternate color version of A_Member’s JF Hairs.

This will not overwrite the original AM version.

DL: https://mega.nz/file/rIkGDCwR
Key: YVL3X4b5IQWhdl1_nLrkOShkhMzyY6j8nnXqjU9TrSE

July 8th

Mischievous Devil has been released on patreon on early access for the month of July.
Ember’s will be given access next week.
Patrons and public access will be sometime the week after.

Origa Discordia is still a wip

End of June Round-up

Patreon pledges were paused for the month of June, and will resume for July.

An alpha version of Origa Discordia’s clothes is available to patrons.
It still needs a bit of work.

======

A polished port of a different mod will be coming soon.

My LRE Preset has been modified a bit. Less room for error. If you lose the link, you could always check my Misc page.

Uncensor 2 to Studio has been updated. It now has support for Nameless Peasant’s BS Vag, a blendshape vagina.

See you next month.

General Update

Patreon is being paused for the month of June since I didn’t have anything for release this month for patrons. Current patrons won’t be charged, but new patrons will.

Patreon is also adding taxes next month, which will affect patrons on a case by case basis. I guess that means you’ll get a month to get use to the tax rates.

T-Pose has been updated to include an A-Pose. More info found on the T-Pose page here.

Patreon poll is going to end Friday. It was supposed to end a week ago.

Current set of clothes is still being worked on. Even if its a custom, something else has been preventing me from working on it in a timely manner. It’s also been through 3 passes.

This picture is the 2D template I’m working from. The 3D version is partly done, and an alpha version will be released sometime this week or next week for patrons.

I’ve been thinking of making blank meshes to take advantage of overlays, but time will tell when HS2 rolls around.

[Mod] Nightmare Princess Velguirie

Patreon voted port. Original post here.

Texture is average I guess, especially considering it wasn’t remade in DOA.

Two versions, one with flame and one without.
Cape has dynamics.
Not really colorable.

Coordinate is included for both versions.

Ver 1.02
Removed neck piece from top.
Placed neck piece in sock category. Use allegretto to put it in other categories!
Added missing coordinate cards for updated version.

DL: https://mega.nz/file/aNtTnA4Q 
Key: cntIbAi1K8PcDkWfqzBI_VwN9_HtTEnopTIojK_OUTo

[Studio] IK Items

This pack adds 5 IK items.
IK Hotdog Penis Hard/Soft
IK SoS Penis Hard/Soft
IK Generic Aim

Each item has a handle that can be moved using NodesConstraint or HSPE.
A scene has been included in the mod with samples on how to use these items.

If you have the latest version of HSPE, you adjust a few IK properties to fine-tune it.

The documentation folder has more information on how to set up one of the items.

For older versions, see the the original SOS Cock or Hotdog Deluxe.

Required Mods:
HSResolveMoreSlotID
NodesConstraint 1.1.0+
HSPE 2.11.0+
HSUS
HSExtSave

Useful
RendererEditor

Ver 1.1
Added 3 new blendshapes to SOS and Hotdog. This may be useful in timeline animations.

DL: https://mega.nz/file/WNk1AJAI 
KEY: zeKNGT8IJlvQj0PkWhyVBcUKqr5Sy2SXU9rdfGF6-bY

April 24th

Edit: I have restored the Women’s Clothes page from a backup and slightly altered the layout. I have also applied the same alterations to the studio page. This changes how the tables were aligned and set up.

========================================================================

Mod Update

Velguirie the Nightmare Princess’s clothes has been completed and available early for Burning patrons and up. Embers will be given access next week through the mail, and patron access the week after.
It’ll be public around the same week as patrons.

========================================================================

Modding Update

Joan has released the Timeline mod on his patreon page. He noted that HSPE now has support for IK tweaking, and so I’ve gone ahead of started converting a few things to IK.

Hotdog and SOS will be getting a new standalone update using IK. If you’re savvy with Nodesconstraint and colliders, you can make use of this soon.

========================================================================

StudioNEO Issues

I’ve also received reports that old scenes sometimes end up with limp dongs when you load. If you’re reading this and run into these issues, please download one of the older/newer versions of the dongs.

Because of this, I have removed neffarious versions of Hotdog, keeping only 1.07 and 1.03.

The error was because I changed a few technical things between versions 1.03 and 1.04 relating to nodesconstraint.

========================================================================

Polls

If you aren’t a patron, the next project has been decided. It’s going to be a custom clothes of Discordia Olga from Kuroinu.

She doesn’t wear a lot, and its pretty form fitting. This should be easier than the drapery that was Sword Maiden.

[Clothes] Dungeon Samurai

Patreon voted port.

There’s a lot of stuff even though even it’s pretty like a bikini.

2 Bras. Version B is more covered. The card uses version B.
Can be colored for the most part.
There’s multiple accessories and some dangly parts.
There’s also a katana + scabbard for the studio. Check the documentation folder for where to find it.

Coordinate card is included.

DL: https://mega.nz/file/PJE22SBZ
Key: x-dMcEx8ihUrpLrHQfKDRiNw3hP3yV02MHKEvBvYiBk

Blogging March 24

Not a lot to talk about that isn’t me going into technical details, so I’ll be brief.

Dungeon Samurai

A new port is now available. It’ll be available to Embers next week on my patreon. Everyone else the week after. Hopefully I don’t need to rush an update again.

 

==================

LRE+IBL presets

My LRE+IBL preset is available for download. It’s just prepackaged to make it easier to install.
You can find it in the LRE preset folder here.

It’s not much, but I use it as a base to set up my characters before I switch to IBL.

LRE is meant to be customizable, so just edit the xmls files in the ImageEffect folder to get the colors to your liking. This will become your base or starting point. Once you activate IBL, magic happens.

In a sense:
LRE = Default, base, or starting point.
IBL = A scene by scene basis of magic.

==================

Longcoat for AI

If you remember the Yakuza set of clothes I ported earlier, I’ve ported the longcoat to AI as well. If you’re on discord, you can find it in the AI-mod sharing. This was just a one-off thing to test the waters. Now I know the process, I just need the motivation.

==================

Gave up on Sword Maiden

I just couldn’t pull the motivation into doing it anymore. Too many shots in the dark, too little results. Even though it’s just drapes! I’ve considered to take a step back for a breather, and try something else, like a really big coat.

Stay safe everyone, and drink plenty of water!

[Clothes] Gothic Soldier

Port from S.K.I.L.L. Special Forces. Original patreon post here.
This was part of my alpha set, converted and cleaned into a standalone set.

Textures are kind of low resolution, but it’s colorable.

Two color channels,
Several accessories.
Some half offs.
Coordinate is included, featuring everything above.
Should be compatible with big breasts and small breasts.

DL: https://mega.nz/#!CJFz1Soa 
Key: hrzN9tRdO0ftz2HV3vG8megAjhqN_WsZOu4FQqGsP4o

[Mod] Yakuza Set Revamp

This mod is a stand-alone revamp of the old Yakuza set of ported clothes.
The previous 4 suit were polished and had their shaders change.
Altered clothes are added as new entries, with an R at the end.

This mod also includes 5 new sets of clothes + 1 minor alt.
- Loose suit.
- Loose shirt.
- Loose shirt with longcoat.
- Loose shirt with longcoat rigged to the hips.
- - Basically, wear the version that fits your character if they’re fat.
- Trenchcoat.
- Overcoat.

All with dual color channels and compatibility with various shoes.
And speaking of shoes, some of it was updated too with 1 new Snake Leather shoes.

Required:
BonesFramework
The usual

Ver. 1.03
Fixed seams on loose shirt/suit.
Polished some chest related things.
Fixed stretchy fingers on 4-button suit.

DL: https://mega.nz/file/HM0HFDwb
Key: 1kH9vvet9SMpSHtSXnhT_EwdJQoj0ntriMvjdbf6zTY

Old version if you want those too.
DL: https://mega.nz/#!TMt1hYzQ
Key: h53s4TxoCyICRo0ooCakPTCJmEGcuoEsKf-bQKorFXQ

You can have both versions installed.

[Studio] HsStudioInvisible and Uncensor2 to Studio

These really small mods takes special accessories and makes them accessible in the Studio by simply referencing them.

By equipping the studio item, it’ll function just like the accessory does. This means you can change clothes or state, or even switch uncensors whenever you want without entering the character maker while keeping the accessories active.

HsStudioInvisible to Studio

This mod lets you access StudioInvisible functions through studio items.

- Equip to activate. Delete to disable.
- If there are errors, save and reload the scene.
- If there are duplicate accessories, your character might already be wearing a ring.

Required:
- HsResolveMoreSlotID
- HsStudioInvisible

DL: https://mega.nz/#!qJMDHKJD
Key: AZtVH29zjv6D8PzeXWL4UcAK24vlX1PVHMIg6imVC1k

==============================================================================

Uncensor2 to Studio

This mod is the same as the above, but for Uncensor2 accessories.

- Equip/Parent to activate. Delete to disable.
- If there are errors, save and reload the scene.
- If uncensor is blank like in the above pic then you might be missing the specific mod.

Required:
- HsResolveMoreSlotID
If you wish to use HiR, just change the ID to something it can use in abdata\studioneo\HoneyselectItemResolver\ante_uncensor2_studio_list.txt
- Uncensor2 + Add-ons

Please see the readme for links to UC2 mods.

Ver1
Initial release

Ver1.01
Added Hi-lite and Sute.
Name changes.

Ver1.1
Added Nameless Peasant’s BS Vag.

DL: https://mega.nz/file/2FsGEIaa
Key: khgbFsaUkSNASihT-nYHkKRg1GuQLyJ1WkJt-tiAG4g

[Studio] HS Tongue

Forgot to post this last week. This was on the discord.

HS Tongue:

This is just the HS tongue, extracted and converted into a studioneo item. It has bones close together, but you can move the sides up and down. There’s some dynamics, so you can have the tongue kind of roll around with touched with a collider.

DL: https://mega.nz/#!KUt3kA6S 
Key: vBLfmriWZAFpqqYINmtPuBWIzHuBsZia_yJqZjAJmbk

It can be found in character accessories in the studio.

[Mod Update] Big Booby Buttdate

Chun li’s gown has been updated.
Link: https://antekorama.blogspot.com/2018/10/mod-chun-li-black-gown.html

Voguish and Nano have been updated.
Link: https://antekorama.blogspot.com/2019/03/mod-voguish-and-nano-bikini.html

Long story short: Better breast support and other polish.

Progress Report

I have ported a new set of clothes. Burning patrons can pick it up now over on my patreon page while it undergoes more polish, if any.
Everyone else, wait a while.

Sword Maiden

is actually much more difficult than I thought. I have to balance between how I want to rig it and how I want to model it, while making sure people can customize it.

I think I could’ve gotten something out sooner if it was tight clothes or a simple dress, but its drapery all over.

Polishing

If you missed the previous posts, I have polished up the Steampunk Casual outfits. They have been given new shaders and a facelift, fixing some minor problems, adding more customizability, and a few other things mentioned on the page. Of course, it’ll overwrite the old stuff with good stuff.

I’m planning on doing some polishing to some more clothes that may need them, though it may be restricted to only SB3UGS.
Current target: Chun-Li and Voguish

[Mod] Marion Alternate Color Map

I needed this for a specific character. You might find it useful too.
Find it in tops as [Ante] Marion

DL: https://mega.nz/#!qc8nDSJS 
Key: 1782JXP_JYbQwSLmlWpG6qhYerhCVmn5FPmKThNR7dg

[Mod Update] Steampunk Casual

This update converts the two DOA steampunk mod shaders from vanilla to HSStandard.
Original announcement: https://www.patreon.com/posts/34159018

This will resolve issues regarding shadow acne!

Along with that:
- Color maps slightly altered to be compatible with new shader.
- Bypassed sRGB, so you can make clothe more colorful.
- Added detail maps.
- Cleaned up some texture noise.
- Wool leggings added to socks category. It’s pretty thick.
- Added a collar to pantyhose category.
- Thigh belts added.
- Tool belt split into two.
- Mesh errors on the tool belt repaired. It went by unnoticed for awhile.
- Support for smaller breasts. Reduce chance of clipping and shadows.
- Some clipping fixed in gloves.
- Coordinate card updated to reflect changes.
- Smaller file size.

DL: https://mega.nz/#!nZsR1CIb 
Key: W-v8Y2HB8_ArPXMICGGHksbYb2PUGSrhJO5aDvexSsQ

[Mod] Princess Rosette Swimsuit

Originally a commissioned port. Re-polished for public release.
A lot of transparency, so there may be render queue and shadow issues.

Not really colorable.
Two coordinates for normal and swimsuit variants.

DL: https://mega.nz/#!KFkCQKoB
Key: 87Fvol-mMaKkjs25MrByrqQ2MjlfdofKzmbvWK7gSVI

[Clothes] Sarah’s Leather Suit

This was a commissioned port, now made public.

Kind of old, may contain mistakes.
Has half off.
Colorable.
Coordinate is included.

Nothing much to say about it really.

DL: https://mega.nz/#!jcVlGKxL
KEY: k0F5zslT3Y0-pd-WnZlE2TyQgL6cei4wBs0ycwz_HLc

[Studio Scene] Other Rigs

I have uploaded more scene rigs to my share folder.
Get them here

The first scene rig is a Male<->Female pose converter of sorts.
The character with the cone is the main actor, and the person next to them will mimic. Use this if you want to transfer poses to another gender, and save it as a preset. It’s not a 1:1 transfer, so some adjustments may be required.
This is not a puppet rig, so it’s not useful for animations.

The second rig is a update to my old animation rig. Or rather, a complete remake. My old animation rig uses AdvancedIK. This new one uses NodesConstraint.

It has a spine fix control inside the folder which will let you adjust the spine angling as shown here: https://streamable.com/sgqa2
It also has a shoulder fix inside the character’s chest group if you want to move the shoulder around.

The fix handles aren’t meant for animating, but you can use the other folders to animate. Just attach them to other characters or pistons, or use VNGE. Or simply just pose them.

[Studio Scene] FK Torso Rig | Fake FK/IK

This scene contains a fake FKIK rig.
You’ll have access to FK spine and shoulders and IK limbs.
Not ideal for animations.
Example:

Required: Latest version of HSUS, Nodes Constraints and HSPE.

Download the scene from my Studio folder HERE.
There’s one for male and female.

To Use:

1. Load or import scene.
2. Replace the [IK]Character that’s inside the folder with your character.
3. Replace the [FK]Character that’s outside the folder with same character.
4. Manipulate the yellow folders to see what each one does.
5. For facial expressions and fingers, select the [FK]Character and edit like normal.
6. To move entire character, move the [Man] or [Woman] folder.

Example of the rig (version 1) in action: https://streamable.com/dat1z

Left: [IK] and [FK] characters are mismatched. Controllers not aligned.
Right [IK] and [FK] Characters are the same. Controllers are aligned.

When posing the character, you will be using the [folders] inside the [Woman]/[Man] folder. These correspond to existing IK and FK handles.

Depending on how you parent each of the [folders], you can move multiple nodes at the same time, thus making it easier to tweak your poses.

Example: https://gfycat.com/thirdnaughtyblackfish

To Transfer to Normal FK Character.

1. Select the [FK]Character.
2. Save as pose preset.
3. Load pose preset on new character.
4. Readjust the central controller to realign.
   

Example: Loading a saved preset. The new character is tilted and must be rotated at the center.

Tip: If you select the FK character and click [Copy Transform], you can paste that transform onto the central controller of the new character to quickly fix realignment.

Pose transfer has be completed. It matches perfectly with the FKIK rig.

Tips and Tricks
Since the controls are mostly all folders, you can move most of these folders around to your liking. For example, you can move the left hand folder into the right hand folder and move both together. Useful for two handed weapons.

You can also use the same parenting method to make a fake FK limb if you want to rotate an entire leg or arm.

Use the [Torso] folder group to move the hips and waist instead of the [Hip] and [Waist] controllers.

Issues:

Not useful in animation due to how the [FK]Character is connected to the [IK]Character.

Certain controllers may offset. Usually the shoulders.

Some controls will not transfer to a pose preset unless you’re using a mod that enables them. These are typically the second foot ankle, and face.

[Studio Poses] Wall and Katana

I made a bunch of studio poses for girls. Just put them in UserData\studioneo\pose
These poses might be merged with Duck and Yue’s pose pack later, but you can pick them up right now by going to my sharing folder.

It’s a bunch of wall related poses and basic katana poses. These were made using a piston animation rig, which wasn’t really ideal because of waist issues, but it let me pose two handed weapons a bit easier than full FK.

Samples:

[Mod] Leifang Leather

This is a pretty old port.

This was made before I switched over to unity and before I learned how to do proper breast weights.

Expect some errors.

Fit for modest breast sizes. Pants may clip on extreme poses.
Half off state for top.

DL: https://mega.nz/#!bNkBUQaD 
Key: _hriI-hhHGAu-L33eEB7VF1Jxk_M7scLGWTlzAiEtHo

[Studio Mod] Blur Items

This was made on the spur of the moment.
This was made with Shaderforge using a youtube video as a guide. I might add more filters if I could figure some things out… like making a better blur.

This adds a very basic blurring items you can use to blur objects behind them. It might be good if you need a quick blur or something subtle. It’s not something that can replace Depth of Field though, but you might find some uses for it.

You can adjust the blurriness with the intensity and metallic sliders. You can layer multiple blur objects with varying settings to create a smoother blur.

You might be able to blur backgrounds without it blurring your character’s hair. Be sure to play with the renderqueue with renderereditor to finetune the blur plane.

Required:
HSResolveMoreSlotID (I use an expanded ID)

DL: https://mega.nz/#!6IkyXS4R 
Key: xABxWZUBcez82EGrb3hsywMFW3ROTn_hQhiKCX0iwwo

Found in [Basic Shapes] as: [ante] Blur Plane

Jan 12 2020

So many things happening this week.

Hotdog Deluxe was updated. 
I was playing around with a particular plugin and found that hotdog was having some issues with its dynamics when one of the bones was being manipulated by an outside source. After some trial and error, the end result was just moving the start of the dynamics 1 bone. There’s no huge difference, but it solves a technical issue not many people may have ran into yet.

Burning patrons now have access to a swimsuit port. Marie’s Princess Rosette uniform. This was an old commission, revisited to allow for bigger boobies. You can pick it up right now here. For everyone else, wait a while!

Leifang and Sarah’s leather suits are set to go public sometime this week. Patrons can pick them up immediately, just click the pics on the catalog. Everyone else, just be wee bit more patient.

If you somehow missed the last post. I ported some plain straps.
The person who requested it really wanted straps, and we didn’t have straps, so now we do! It was also their birthday, so happy birthday!

Get the straps here. 

Speaking of genitals, it was updated again!
It was brought to my attention that the vagina was overlapping over itself for some reason. This was because I changed the angling of the bones to be more claw-like. This would yield better looking deformations when the vagina opened. However, it was more likely to be pushed in by dynamic colliders than open. This update changes the bone layout to decrease the chance of that happening.

Sword Maiden
I’ve been working on this on and off for quite a while, and there’s not much to show of it.

I seriously need to get the blocking of all the parts down before going into detailing, but I obsess over stupid things. I’ll get back to Vindictus ports eventually.

Other Modding Stuff
I was speaking with another modder over the potential of using blendshapes for certain things. Blendshapes were recognized through Uncensor Selector, and all I did was add a couple morphs here and there. It might not look like blendshapes, but its blendshapes.

It has been possible for a while, but no one really did anything with it, much like how vagina blendshapes with UC2 has been possible for a while ever since HSPE supported blendshapes.

Hhopefully we’ll get indented thighs for certain pantyhoses and socks. Uncensor Selector has it easy in that regard, which HS lacks. We’re stuck with custom body tops for quite a while.

There’s still some technicalities that needs to be figured out with UC2 blendshape vaginas.

I also switched over to BepInEx. There’s still some stuff that needs to be ironed out, but it works.

This might be the only long post for a while.
Until next time~

[Studio Mod] Cheat Strap

The guitar shown in this pic is Metagraphy’s Les Paul Custom.

This was a speed port of a poser strap as a special request.

This single end armlength strap can be attached to your instruments, weapons, pants, or anything else you can think of to help add a little something yo your scenes.

6 straps with different patterns, all with dual color channels so you can tweak the base and band to the liking.

Required:
HSResolveMoreSlotID :: I am using an expanded ID, so it may not work in HiR.

You can find the item as [ante] Cheat Strap in the FK section.

Download: https://mega.nz/#!HF9zkQhD
Key: BAcNxgZGGjj3RWTXbwlFPnM0zBDkfNJt2gn3prGItyo

New Years Update

Dyna Vagina has been updated. Bones have been added to the clitoris so you can expose the urethra or just move it around.

The dynamics were slightly altered too, so it should “bounce” a little bit more.

Pick it up in the original page here.

Patrons have currently have early access to Sarah’s leather jacket. It’s an older commissioned mod, but you can get it early here. If you aren’t a patron, wait a while~.

Let’s hope 2020 goes smoothly. Not much else I can say other than I really need to finish Sword Maiden and get started sorting out the vindictus outfits.