Thursday, February 27, 2020

[Studio] HS Tongue

Forgot to post this last week. This was on the discord.

HS Tongue:

This is just the HS tongue, extracted and converted into a studioneo item. It has bones close together, but you can move the sides up and down. There’s some dynamics, so you can have the tongue kind of roll around with touched with a collider.

DL: https://mega.nz/#!KUt3kA6S 
Key: vBLfmriWZAFpqqYINmtPuBWIzHuBsZia_yJqZjAJmbk

It can be found in character accessories in the studio.

Monday, February 24, 2020

Progress Report

I have ported a new set of clothes. Burning patrons can pick it up now over on my patreon page while it undergoes more polish, if any.
Everyone else, wait a while.


Sword Maiden

is actually much more difficult than I thought. I have to balance between how I want to rig it and how I want to model it, while making sure people can customize it.

I think I could’ve gotten something out sooner if it was tight clothes or a simple dress, but its drapery all over.


Polishing

If you missed the previous posts, I have polished up the Steampunk Casual outfits. They have been given new shaders and a facelift, fixing some minor problems, adding more customizability, and a few other things mentioned on the page. Of course, it’ll overwrite the old stuff with good stuff.

I’m planning on doing some polishing to some more clothes that may need them, though it may be restricted to only SB3UGS.
Current target: Chun-Li and Voguish

Saturday, February 22, 2020

[Mod] Marion Alternate Color Map

I needed this for a specific character. You might find it useful too.
Find it in tops as [Ante] Marion

DL: https://mega.nz/#!qc8nDSJS 
Key: 1782JXP_JYbQwSLmlWpG6qhYerhCVmn5FPmKThNR7dg

[Mod Update] Steampunk Casual


This update converts the two DOA steampunk mod shaders from vanilla to HSStandard.
Original announcement: https://www.patreon.com/posts/34159018

This will resolve issues regarding shadow acne!

Along with that:
- Color maps slightly altered to be compatible with new shader.
- Bypassed sRGB, so you can make clothe more colorful.
- Added detail maps.
- Cleaned up some texture noise.
- Wool leggings added to socks category. It’s pretty thick.
- Added a collar to pantyhose category.
- Thigh belts added.
- Tool belt split into two.
- Mesh errors on the tool belt repaired. It went by unnoticed for awhile.
- Support for smaller breasts. Reduce chance of clipping and shadows.
- Some clipping fixed in gloves.
- Coordinate card updated to reflect changes.
- Smaller file size.

DL: https://mega.nz/#!nZsR1CIb 
Key: W-v8Y2HB8_ArPXMICGGHksbYb2PUGSrhJO5aDvexSsQ

Sunday, February 16, 2020

[Mod] Princess Rosette Swimsuit

Originally a commissioned port. Re-polished for public release.
A lot of transparency, so there may be render queue and shadow issues.

Not really colorable.
Two coordinates for normal and swimsuit variants.

DL: https://mega.nz/#!KFkCQKoB
Key: 87Fvol-mMaKkjs25MrByrqQ2MjlfdofKzmbvWK7gSVI

Saturday, February 8, 2020

[Clothes] Sarah’s Leather Suit


This was a commissioned port, now made public.

Kind of old, may contain mistakes.
Has half off.
Colorable.
Coordinate is included.

Nothing much to say about it really.

DL: https://mega.nz/#!jcVlGKxL
KEY: k0F5zslT3Y0-pd-WnZlE2TyQgL6cei4wBs0ycwz_HLc

Friday, February 7, 2020

[Studio Scene] Other Rigs

I have uploaded more scene rigs to my share folder.
Get them here

The first scene rig is a Male<->Female pose converter of sorts.
The character with the cone is the main actor, and the person next to them will mimic. Use this if you want to transfer poses to another gender, and save it as a preset. It’s not a 1:1 transfer, so some adjustments may be required.
This is not a puppet rig, so it’s not useful for animations.


The second rig is a update to my old animation rig. Or rather, a complete remake. My old animation rig uses AdvancedIK. This new one uses NodesConstraint.


It has a spine fix control inside the folder which will let you adjust the spine angling as shown here: https://streamable.com/sgqa2
It also has a shoulder fix inside the character’s chest group if you want to move the shoulder around.

The fix handles aren’t meant for animating, but you can use the other folders to animate. Just attach them to other characters or pistons, or use VNGE. Or simply just pose them.

Thursday, February 6, 2020

[Studio Scene] FK Torso Rig | Fake FK/IK

This scene contains a fake FKIK rig.
You’ll have access to FK spine and shoulders and IK limbs.
Not ideal for animations.
Example:

Required: Latest version of HSUS, Nodes Constraints and HSPE.

Download the scene from my Studio folder HERE.
There’s one for male and female.

To Use:

  1. Load or import scene.
  2. Replace the [IK]Character that’s inside the folder with your character.
  3. Replace the [FK]Character that’s outside the folder with same character.
  4. Manipulate the yellow folders to see what each one does.
  5. For facial expressions and fingers, select the [FK]Character and edit like normal.
  6. To move entire character, move the [Man] or [Woman] folder.

Example of the rig (version 1) in action: https://streamable.com/dat1z

Left: [IK] and [FK] characters are mismatched. Controllers not aligned.
Right [IK] and [FK] Characters are the same. Controllers are aligned.


When posing the character, you will be using the [folders] inside the [Woman]/[Man] folder. These correspond to existing IK and FK handles.



Depending on how you parent each of the [folders], you can move multiple nodes at the same time, thus making it easier to tweak your poses.

Example: https://gfycat.com/thirdnaughtyblackfish

To Transfer to Normal FK Character.

  1. Select the [FK]Character.
  2. Save as pose preset.
  3. Load pose preset on new character.
  4. Readjust the central controller to realign.


Example: Loading a saved preset. The new character is tilted and must be rotated at the center.

Tip: If you select the FK character and click [Copy Transform], you can paste that transform onto the central controller of the new character to quickly fix realignment.

Pose transfer has be completed. It matches perfectly with the FKIK rig.


Tips and Tricks
Since the controls are mostly all folders, you can move most of these folders around to your liking. For example, you can move the left hand folder into the right hand folder and move both together. Useful for two handed weapons.

You can also use the same parenting method to make a fake FK limb if you want to rotate an entire leg or arm.

Use the [Torso] folder group to move the hips and waist instead of the [Hip] and [Waist] controllers.


Issues:

Not useful in animation due to how the [FK]Character is connected to the [IK]Character.

Certain controllers may offset. Usually the shoulders.

Some controls will not transfer to a pose preset unless you’re using a mod that enables them. These are typically the second foot ankle, and face.

[Studio Poses] Wall and Katana

I made a bunch of studio poses for girls. Just put them in UserData\studioneo\pose
These poses might be merged with Duck and Yue’s pose pack later, but you can pick them up right now by going to my sharing folder.

It’s a bunch of wall related poses and basic katana poses. These were made using a piston animation rig, which wasn’t really ideal because of waist issues, but it let me pose two handed weapons a bit easier than full FK.

Samples:

Monday, January 27, 2020

[Mod] Leifang Leather


This is a pretty old port.

This was made before I switched over to unity and before I learned how to do proper breast weights.

Expect some errors.

Fit for modest breast sizes. Pants may clip on extreme poses.
Half off state for top.

DL: https://mega.nz/#!bNkBUQaD 
Key: _hriI-hhHGAu-L33eEB7VF1Jxk_M7scLGWTlzAiEtHo

Tuesday, January 21, 2020

[Studio Mod] Blur Items

This was made on the spur of the moment.
This was made with Shaderforge using a youtube video as a guide. I might add more filters if I could figure some things out… like making a better blur.

This adds a very basic blurring items you can use to blur objects behind them. It might be good if you need a quick blur or something subtle. It’s not something that can replace Depth of Field though, but you might find some uses for it.

You can adjust the blurriness with the intensity and metallic sliders. You can layer multiple blur objects with varying settings to create a smoother blur.

You might be able to blur backgrounds without it blurring your character’s hair. Be sure to play with the renderqueue with renderereditor to finetune the blur plane.

Required:
HSResolveMoreSlotID (I use an expanded ID)

DL: https://mega.nz/#!6IkyXS4R 
Key: xABxWZUBcez82EGrb3hsywMFW3ROTn_hQhiKCX0iwwo

Found in [Basic Shapes] as: [ante] Blur Plane

Sunday, January 12, 2020

Jan 12 2020

So many things happening this week.

Hotdog Deluxe was updated. 
I was playing around with a particular plugin and found that hotdog was having some issues with its dynamics when one of the bones was being manipulated by an outside source. After some trial and error, the end result was just moving the start of the dynamics 1 bone. There’s no huge difference, but it solves a technical issue not many people may have ran into yet.


Burning patrons now have access to a swimsuit port. Marie’s Princess Rosette uniform. This was an old commission, revisited to allow for bigger boobies. You can pick it up right now here. For everyone else, wait a while!

Leifang and Sarah’s leather suits are set to go public sometime this week. Patrons can pick them up immediately, just click the pics on the catalog. Everyone else, just be wee bit more patient.


If you somehow missed the last post. I ported some plain straps.
The person who requested it really wanted straps, and we didn’t have straps, so now we do! It was also their birthday, so happy birthday!

Get the straps here. 


Speaking of genitals, it was updated again!
It was brought to my attention that the vagina was overlapping over itself for some reason. This was because I changed the angling of the bones to be more claw-like. This would yield better looking deformations when the vagina opened. However, it was more likely to be pushed in by dynamic colliders than open. This update changes the bone layout to decrease the chance of that happening.


Sword Maiden
I’ve been working on this on and off for quite a while, and there’s not much to show of it.

I seriously need to get the blocking of all the parts down before going into detailing, but I obsess over stupid things. I’ll get back to Vindictus ports eventually.


Other Modding Stuff
I was speaking with another modder over the potential of using blendshapes for certain things. Blendshapes were recognized through Uncensor Selector, and all I did was add a couple morphs here and there. It might not look like blendshapes, but its blendshapes.

It has been possible for a while, but no one really did anything with it, much like how vagina blendshapes with UC2 has been possible for a while ever since HSPE supported blendshapes.

Hhopefully we’ll get indented thighs for certain pantyhoses and socks. Uncensor Selector has it easy in that regard, which HS lacks. We’re stuck with custom body tops for quite a while.

There’s still some technicalities that needs to be figured out with UC2 blendshape vaginas.


I also switched over to BepInEx. There’s still some stuff that needs to be ironed out, but it works.

This might be the only long post for a while.
Until next time~