Thursday, November 22, 2018

[Mod] Vampire Slayer

A patreon voted Vindictus port. It comes with a dynamic hat. Control it using HSPE!
A back accessory cape is included as well.
Original patreon page: https://www.patreon.com/posts/22626245

Mods Required
SBX2.5
MoreSlotID
BonesFramework

Recommended
HSPE

The front chains may clip.
Normals may seem a little off where the mesh was split

Coordinate is included. Be sure to adjust the hat to fit your character’s head.

DL: https://mega.nz/#!CNdkmAiT
KEY: V5JzAqoL-sUMknOUxNqDWeR1_12C57BQZfU3Ev8qTfc

As of this post:
Currently working on: Commission then Dark Rebel next.

Have a good weekend!

Tuesday, November 20, 2018

Progress Report Nov 20

Currently, the only clothing mod I have installed is this commission.
Despite me only having one mod installed, it still takes a while for the clothing list to load.

Just a little bit of trivia, I guess.

Due to technicality, this one will be private.
The next commission will also be private by request.

Dark Rebel will follow and be on the public line.

Followed by another commission that may or may not be private.
Followed by a public commission.

Thank you, Aku, for keeping my head sane.

Friday, November 16, 2018

Progress Report Nov 16

Gloves. It never gets easier. The picture is of me lining of the original HS mesh so I can transfer the weights and weight paint in a different pose.
This is also a bethesda conversion, and I really hate doing those.

I want to try and get this done asap, but it looks like my weekend is going to be full with this commission and the next. Ideally, I want to get things done before Thanksgiving break, so I can begin working on the poll winner.

If you’ve been keeping track of my Patreon postings, a new $10 tier has been added for people who only want early access. Those who remain in the $15 will get access to test mods to make up for the lack of beta mods due to a change in workflow.
Sorry, I don’t have anything ready yet.

In other news, I accidentally nuked my HS install due to a dumb error on my part. But that’s fine. I have backups so restoring everything took only ~30 minutes of my time.

Fixing the remaining stuff will have to to be later.

Saturday, November 10, 2018

[Mod][Swimsuit] Bay Leaf

This was a commissioned port.
Original Patreon post.

A single swimsuit with 3 textures, all with two color channels.
The fourth swimsuit was done with render editor.

Ver1.1
Switched to HSStandard shader. Hooking the old shader was a pretty tedious and boring process anyways.
Adjusted underboobs to better support bigger breasts.

Required:
MoreSlotID
SBX2.5

Coordinate is included.

Download Link: https://mega.nz/#!LFEj3A7D 
Key: L0Fg4KBJX_TRykoPiVdK_C5e-aH4Dw2r-kk6i910k8E

Friday, November 9, 2018

Progress Nov 9th

I’ve finally finished the Vampire Slayer set. This was was actually quite easy, but tedious. There was a lot of things I needed to take a good look at, like split mesh and underside meshes.

If you're a patron, you can look at a few previews here.
If you’re a second mate, you can pick it up now here.

Next up I’ll be working on a hefty mod. Due to some technicalities will be private.
The next commissioned mod after that might be private too.

After those two, Dark Rebel will be worked on.

After that is commissions again. Private most likely.
Then Public.

I think that assets with a lot of little doodads take a lot longer than poly heavy single meshes. The Gunslinger Elena maid set of clothes suffered the same issue of having many pieces despite being low poly, while some Daz clothes ended up being quick despite being extremely high poly.

If you’re a patron, please see this post for important info regarding changes in pledges. If you’re not a patron, please look at it anyways if you wish to become a future patron!

I did some math in maya for animation to get more natural bends in the joints. It didn’t take long, but now I need to plan and build the control rig and FK IK nodes as well as reverse foot rigs, and that takes quite a bit time so will be on hold for a while.

Saturday, November 3, 2018

Progress Nov 2nd

By lord this is tedious!

According to my master list, I’ve done over a lot of gloves. However, they never get easier. It’s the same amount of tedium as always.

This non-patron commission was a pretty hefty one too, with ornate designs pretty much everywhere. The dress (ack!), the gloves, the boots, the top, the hair…

I may have to charge a little more for things like this in the future.

As of this post, I’m at the final phase and can begin Vampire Slayer too.

Wednesday, October 31, 2018

[Mod] Chun-Li Black Gown ver1.1

Patreon Voted Port.
Original post: Here

A DAZ version of Chun-Li’s black gown. A little different than from the game itself.
Two color channels.

Req:
SBX2.5
MoreSlotID
BonesFramework

Ver 1.1
I ripped the assets out of my mod and rebuilt the project.
- Better support for bigger breassts.
- Half off states for lower portion.
- Switched shaders. No more shadow acne!
- Switched to BonesFramework. The dress is now longer without bonemod!
- Separated corset. You can now color both the components!
- Minor texture cleaning.

DL: https://mega.nz/#!KNtjnTIA 
KEY: jV-rncV-tWa3brcDxtVgRP58g_d-4_NWXsAzcmNnk78

Tuesday, October 30, 2018

[Download] Dance Animations + Blogging

I made a Zappa some time ago for Halloween, why not make him do something?

I took another look at the HS rig for both male and female and was able to set some expressions to make use of the extra roll joints. Combined with retargeting, it makes for better deformations, but still not perfect.

Controls haven’t been planned out at all, so making custom animations is going to be on hold for a while. The most I can do at the moment is retarget. That doesn’t require a custom control rig.

============================================================================

I didn’t want to share these because, not only are the animations a little glitchy, 50mb zipped up is too much.

Important note: This mod will replace these files:
abdata\studioneo\anim\female\00.unity3d
abdata\studioneo\anim\male\00.unity3d

Please make a back-up of those files.

This mod will replace the Males flex pose into Thriller.
This mod will replace females model poses for the chairs into Thriller and two Vindictus dances as seen here.
It might’ve been a better idea to replace other animations. Since I don’t use a lot of preset poses, I just chose these since it was easier to locate and replace.

Download Link: https://mega.nz/#!DRUw3STY!ZmIH04xQxZQeQ5xt4_XSxAWS8t_d8GZ0HS43yNGnwoU


Note: Due to the finnicky nature of some of the rigs, retargeted animations are sometimes glitchy, especially when the source and target rigs are really different.

Note2: If the animation looks funky with legs floating around, save and reload the scene or go to T-Pose and back to dance. I haven’t figured out what exactly causes this, but it isn’t a huge issue right now.

Note3: Thriller was stitched together from 5 Mixamo preset animations, so the timing starts to go off by a lot in the halfway point. I hope you’re not planning to sync it up to the music without video editing.

Monday, October 29, 2018

Progress Report 10/28/18

I have finished the swimsuit commission. Previously it was an armor commission, but situations changed. Despite it being only 1 swimsuit, it had extra designs that needed a bit of attention.
Patrons can pick it up early here.
For everyone else, check next week or on the 11th.

Looks like I won’t make it to Vampire Slayer before Halloween. Last weeks gig took out a lot of time, and I have a non-patron commission lined up.

Vampire Slayer will start afterwards.

Also, vote if you haven’t.

Friday, October 26, 2018

Progress Report 10 26 2018

Ran into a problem.

I finally got a small gig that I needed to work on, but the client didn’t have any of the rigging or controls for the models he wanted animated, so I had to rebuild most of the stuff, and then animate his characters.

It’s been a long time since I had to rig two handed weapons, so I made a lot of mistakes that required me to go back and rethink the character rigging multiple times.

But I’m done, and the weekend is going to be busy!

I want to sleep early too.

Due to how long it took me, the commissioner decided to switch their commission to something else. Instead of the armor, it’ll be a two color channel swimsuit.
Truth be told, the armor wasn’t that hot. It was a mashup of stuff from various place. The shoulder pads in particular where from some Castanic armor.

Working with the Skyrim bodies is so icky.

Sunday, October 21, 2018

[Mod] Helghast Sniper

This was made to both give men some love and to utilize BonesFramework.
This isn’t a studio item, it’s a costume for males!

You can use HSPE’s dynamic bone function to move the cloth bits around. There’s also a back_base_root bone located under cm_J_Spine03 if you wish to move the backpack around.

With BonesFramework, modders can now add more complex pieces of clothing to both male and female clothes.

Coordinate card is provided.

Req Mods
BonesFramework
MoreslotID
StudioInvisible

Update:
Fixed some weights and dynamics.
Enabled update when offscreen.

Download: https://mega.nz/#!rJskWK4b
Key: !HvmcWxdBmO2_MOxqwPpbUhHvi7g3_Se-6-PYkmNK4R0

Friday, October 19, 2018

Mod – Kaine 2B Ver

Commissioned Mod.
Original post: Here

A difficult port, just because of the breasts.

Another person had already ported this, but I was lucky enough to get a sneak peek at it from a good friend to learn what I should do to make this one the best quality as possible, so I lifted a couple techniques.

Funnily enough, for as great as Nier: Automata is, the texturing are always questionable at best. I’m basically saying, the original Kaine costume looks better than the 2B one.

Two color channels, coordinate is included.

REQ Mods:
MoreSlotID
SBX2.5

Ver 1.1
Adjusted normals.

Ver 1.11
Fixed and overlooked errors with the panties.

Link: https://mega.nz/#!mVsASIQJ
Key: !SY80iDJVXbgwfnAmzcU9MvE8_4QfItB7aGpGQ8db3hY

Tuesday, October 16, 2018

Progress Report


 Pretty easy fitting, but I am preoccupied with another important task at the moment.
What needs to be done:
  • Overall quality outfitting: Get the clothes closer to the body.
  • Make list files
After working with the texture some more, I was able to solve most of my gripes with the model.
I should be done on Wednesday.
Afterwards, I’ll be jumping on two more private commissions then finally, hopefully, ending the month with the poll winner.

The mod has been released here: https://www.patreon.com/posts/22151873
Public release is Sep 1st
Mate access is 25th.

Good news! The commissioned mod after this one is doing to be public! I hope you like armor~