Tuesday, December 18, 2018

[Mod] SoS Cock Ver 1.32

For a more versatile option, please see IK Items mod.

For a newer version of this model in a different mod:
https://antekorama.blogspot.com/2020/04/studio-ik-penis.html

An update to the skyrim dick mod.

Version A: Dynamics added. The shaft is slightly bouncy and the balls move. It retains the original shader. Should be compatible old scenes.
Version B: Less dynamic. Extraneous colliders removed since they caused more problems than good. Uses new dual color shader.
Version C: New dick. Only the balls move. Uses new dual color shader. Best used with HSPE and for animators.

Req: MoreSlotID, HiR, HSPE.

DL: https://mega.nz/#!6IMRGCCY
Key: dwrGunUX5JotSFGTzFI582v2EyZmyhaY2WD_YzngR6I

Monday, December 17, 2018

Monday Progress Dec 17

Since I had the materials set up beforehand when I was doing the polls, I didn’t have to set them up again which meant I could jump right into cleaning and outfitting.

Cleaning is done, and outfitting is almost done. I think the difficult part will be the necklace (not shown) since it’s very wide. It could work as an accessory…

I’m not sure when I’ll get this one done, but it should be before Friday at the current rate.
(It’s also not a Bethesda asset, which meant I didn’t have to deal with the issues they always pose. Also, no gloves!)

Afterwards, you won’t hear much from me for about a week due to commissions. The next poll should go up during this time.


On Sunday, I decided to take a bit of time to test some things.

I’d say the result turned out quite well. This workflow can let met create custom mesh extremely fast, faster than chiseling away at a cube. The only issue following is that I’ll have to unfold the UVs and atlas them in such a way I can easily work with the textures.

Now, actually creating the textures? Maybe some other day…

Saturday, December 15, 2018

Progress Report Dec 15

It’s pretty late while I’m typing this.

Since H27 is done, and set for public release, I’ll be working on the Battle Nun outfit. After that, the next two mods after that are private commissions. I’ll be posting up the new poll then as well.


Rebel is public, if you missed that.



H27 Has been released. If you’re a shining light or above, you can pick it up right here.
For everyone else, check back next week or the week after!



Ended up messing around with some shaders while I was working on the finishing touches for H27.
Joan’s shader has an emission map which can be used to make things glow in the darkest of dark. Works really well with Renderer Editor, but I don’t have anything else that can make use of emissions at the moment other than the Raccoon City set, but my current workflow hasn’t been set for repairing old mods, sadly.



Planning on either doing a quick test rig of this or another flat chested clothes. I might as well check to see what’s cute.

If the test mod comes to fruition, it will be posted here for Radiants or the link sent out last month.

[Release] Rebel

Patreon voted outfit. Original post here.

Props to the modeler. One of the best I’ve seen yet.
Nothing else to say.
Props to Joan for the shader.

Req:
SBX2.5
MoreSlotID

Two color channels, coordinate is included.

DL: https://mega.nz/#!TB1HQCbB
Key: !LiCIK41QW29SGJAdPDTiiLrX5ZIATQYHsvbRkDjKWMY

Monday, December 10, 2018

Progress Dec 10

Taking some time during downtime to write up some stuff.

Almost done with this set. I just need to finish outfitting gloves, then I can got right to skinning and texture work.

It’s a rather simple set. The texture is plain as it can get, so it’ll probably be a lightweight mod. But because it’s a Bethesda thing, outfitting took a bit of time as always.

Also, to prepare for the next mod, which will be public, I decided to waste some bandwidth and pick up Tera.
Instead of dealing with Skyrim variants of Tera armors, I now have access to the raw textures and mesh.

I also have Bless in the backburner, but I have yet to delve into what it has and how I can get it.

This basically means I shouldn’t have to deal with second hand or third party ports for these sets.

If you’re wondering why I’m typing this now, I’m using the kr nexon launcher to download KR Tera, and it lags a lot. It lags so much that my computer suffers huge performance drops doing basic tasks like dragging windows around.

Friday, December 7, 2018

Progress Report Dec 7

Quite a few things.

  • Added ripped textures to a private mod. About 2~ days. Needed to find where the seams where, needed to separate the mesh into top and bottom sections, and needed to rebuild the hierarchy.
  • Did a quick swimsuit private commission. Total time was roughly two days.
  • Made an old mod thicker on request. About 1 day of waiting for maya to respond. This is one not being shared because only one person had problems.
  • This weekend is going to be spent on doing the last private commission for October.
  • After that I’ll be doing the public commission armor, and then finally the battle nun outfit.
    The poll will end at this time as well.

I want to try and at least get started on December commission this month, but we’ll see.

Rebel outfit is now available for embers.
Public release is next Friday

Saturday, December 1, 2018

Progress Report, Dec 1st

The asset was one of the cleanest DAZ assets I’ve worked with so far.
Rebel will be public on December 14th, week early access on the 7th.

There’s not much to say on this other than the fact that I spent only a few days on this because it was so clean.

My weekend isn’t too hot either. I have some housework that needs to be done, and have gotten 3 requests to do a few extra things relating to mods.
I also still have a commission I need to work on, so I’m technically one mod behind schedule.

I will begin work on the last commission for last month asap. This will be private.
Followed by a public commission.
Followed by the poll winner.
Followed by two more commission. One of which is most likely private.

Also, test mod is live. I want to try and get one out every weekend, or every time I release a public mod, but I want to get my schedule in line to a point I’m not working on requests from last month.

Thursday, November 22, 2018

[Mod] Vampire Slayer

A patreon voted Vindictus port. It comes with a dynamic hat. Control it using HSPE!
A back accessory cape is included as well.
Original patreon page: https://www.patreon.com/posts/22626245

Mods Required
SBX2.5
MoreSlotID
BonesFramework

Recommended
HSPE

The front chains may clip.
Normals may seem a little off where the mesh was split

Coordinate is included. Be sure to adjust the hat to fit your character’s head.

DL: https://mega.nz/#!CNdkmAiT
KEY: V5JzAqoL-sUMknOUxNqDWeR1_12C57BQZfU3Ev8qTfc

As of this post:
Currently working on: Commission then Dark Rebel next.

Have a good weekend!

Tuesday, November 20, 2018

Progress Report Nov 20

Currently, the only clothing mod I have installed is this commission.
Despite me only having one mod installed, it still takes a while for the clothing list to load.

Just a little bit of trivia, I guess.

Due to technicality, this one will be private.
The next commission will also be private by request.

Dark Rebel will follow and be on the public line.

Followed by another commission that may or may not be private.
Followed by a public commission.

Thank you, Aku, for keeping my head sane.

Friday, November 16, 2018

Progress Report Nov 16

Gloves. It never gets easier. The picture is of me lining of the original HS mesh so I can transfer the weights and weight paint in a different pose.
This is also a bethesda conversion, and I really hate doing those.

I want to try and get this done asap, but it looks like my weekend is going to be full with this commission and the next. Ideally, I want to get things done before Thanksgiving break, so I can begin working on the poll winner.

If you’ve been keeping track of my Patreon postings, a new $10 tier has been added for people who only want early access. Those who remain in the $15 will get access to test mods to make up for the lack of beta mods due to a change in workflow.
Sorry, I don’t have anything ready yet.

In other news, I accidentally nuked my HS install due to a dumb error on my part. But that’s fine. I have backups so restoring everything took only ~30 minutes of my time.

Fixing the remaining stuff will have to to be later.

Saturday, November 10, 2018

[Mod][Swimsuit] Bay Leaf

This was a commissioned port.
Original Patreon post.

A single swimsuit with 3 textures, all with two color channels.
The fourth swimsuit was done with render editor.

Ver1.1
Switched to HSStandard shader. Hooking the old shader was a pretty tedious and boring process anyways.
Adjusted underboobs to better support bigger breasts.

Required:
MoreSlotID
SBX2.5

Coordinate is included.

Download Link: https://mega.nz/#!LFEj3A7D 
Key: L0Fg4KBJX_TRykoPiVdK_C5e-aH4Dw2r-kk6i910k8E

Friday, November 9, 2018

Progress Nov 9th

I’ve finally finished the Vampire Slayer set. This was was actually quite easy, but tedious. There was a lot of things I needed to take a good look at, like split mesh and underside meshes.

If you're a patron, you can look at a few previews here.
If you’re a second mate, you can pick it up now here.

Next up I’ll be working on a hefty mod. Due to some technicalities will be private.
The next commissioned mod after that might be private too.

After those two, Dark Rebel will be worked on.

After that is commissions again. Private most likely.
Then Public.

I think that assets with a lot of little doodads take a lot longer than poly heavy single meshes. The Gunslinger Elena maid set of clothes suffered the same issue of having many pieces despite being low poly, while some Daz clothes ended up being quick despite being extremely high poly.

If you’re a patron, please see this post for important info regarding changes in pledges. If you’re not a patron, please look at it anyways if you wish to become a future patron!

I did some math in maya for animation to get more natural bends in the joints. It didn’t take long, but now I need to plan and build the control rig and FK IK nodes as well as reverse foot rigs, and that takes quite a bit time so will be on hold for a while.

Saturday, November 3, 2018

Progress Nov 2nd

By lord this is tedious!

According to my master list, I’ve done over a lot of gloves. However, they never get easier. It’s the same amount of tedium as always.

This non-patron commission was a pretty hefty one too, with ornate designs pretty much everywhere. The dress (ack!), the gloves, the boots, the top, the hair…

I may have to charge a little more for things like this in the future.

As of this post, I’m at the final phase and can begin Vampire Slayer too.